SEALIFE Sea Dragon 2500F COB Led Photo-Video Light Kit (Includes Grip, Single Tray, Sea Dragon Case)

SEALIFE Sea Dragon 2500F COB Led Photo-Video Light Kit (Includes Grip, Single Tray, Sea Dragon Case)

Name: SEALIFE Sea Dragon 2500F COB Led Photo-Video Light Kit (Includes Grip, Single Tray, Sea Dragon Case)
Brand: Sealife
SKU: SL671
Availability: OutOfStock

Bright with amazing colors
The Sea Dragon 2500 uses flat panel COB LED technology to closely mimic natural sunlight, bringing out amazing colors in underwater photos and videos. With a Color Rendering Index of 90, the Sea Dragon 2500 solves the problem of muted colors in underwater photos and videos.

The Sea Dragon 2500’s COB LED offers a very wide beam angle that pairs well with wide-angle lenses and covers your image consistently from edge to edge. For even more beam angle, check out the Sea Dragon Duo 5000F Set.

Original price was: USD $703.80.Current price is: USD $492.65.

Out of stock

SKU: SL671 Category: Camera Lights Tags: Diving camera, Sea Dragon, sealife, sealife camera Brand: Sealife

Specificatiions

Body Material	Anodized aluminum light head with fiber-reinforced polycarbonate body
Light Source/Bulb Type	1 x COB LED array (COB – Chip On Board)
Brightness	2500 lumens (maintains 2500 lumens throughout burn time at full power)
Brightness Levels	Full power (100%), half power (50%), and quarter power (25%)
Buoyancy	Negative; -94 grams underwater
Button Control	Long push (1 sec) to power light on/off; Short push cycles through 100% → 50% → 25% → 100% [repeat cycle]
Light Modes	Constant light or emergency signal light (activated by long push of power button); one second flash or SOS at full power
Color Temperature	5000K
Color Rendering Index*	90
Beam Angle	120 degrees (90-degrees underwater)
Battery	Lithium Ion 7.4V, 3400 mAh, 25Wh (included)
Battery Charge Time	170 minutes
Run Time	60 minutes at full power/120 minutes at half power/240 minutes at quarter power
Depth	Tested to 200 feet/60 meters
Dimensions	4.8″ x 2.2″ x 3.8″ (12.2cm x 5.6cm x 9.7cm), head only
Weight	9oz (255g) head only without battery ; 12.9oz (365g) head with battery
Bulb Life	35,000 hours
O-ring	Dual NBR o-rings (lube included)
Country of Origin	Designed/Engineered in USA, Made in China

*CRI is a measure of a light source’s ability to show object colors “realistically” or “naturally” compared to daylight, which has a CRI of 100 and represents the maximum value.

The beam angles for the Sea Dragon lights are shown as the true, tested “in-air” (above water) beam angle. Underwater, due to light refraction, the angle tightens to approximately 33% less.

Avoid using this Sea Dragon light above water for prolonged periods of time
The light is designed for underwater use and water is needed to displace heat. The metal light head at full power will reach temperature of about 140F (60C) degrees within a few minutes, which may cause burning if touched. A thermal sensor will automatically dim the light if internal temperatures reaches 150F (65C) degrees. Immediately turn off light if any parts of the light become hot to the touch.

Feaatures

Powerful 2500 lumen LED light using the latest COB LED array technology.

Three brightness levels: 100%, 50% and 25%.

One button control for easy operation. One button to power light on/off and select brightness.

60 minute burn time at full power.

Constant brightness – Regulated circuitry so light won’t dim with battery power.

90 Color Rendering Index (CRI) that mimics natural daylight.

Easy to expand with Flex-Connect™ trays, grip and flex arms.

120° wide beam angle evenly illuminates the subject with no hot spots. 90° underwater.

Emergency mode emits blinking light or SOS signal to alert others of distress. Activated by holding down power button for 5 seconds from power off state.

Depth rated to 330 ft (100m).

Corrosion-proof metal light head for heat dispersion and durability.

Removable 25Wh 3400 mAh Li-Ion battery w/ charger and international plug adapters included.

Waterproof battery compartment protects internal electronics even if light accidentally floods.

Protective circuitry – The light and battery feature integrated protective circuits that cuts power in the unlikely event the light overheats or short circuits.

Safety pressure release valve – one-way waterproof valve releases battery compartment pressure in the unlikely event of battery malfunction.