The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used – press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc.
Can be converted from a right-handed hose configuration to a left handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However, this procedure must ONLY be performed by an APEKS Authorised Service Technician.
Raided flexi-hoses are now standard on all models. These hoses are lighter weight, more flexible and more durable.
Suitable for coldwater use (below 10 C / 50 F).
Compatible with EAN40 out of the box.
Pneumatically-balanced second stage results in smooth, easy breathing.
The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
Manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.
A silicone exhaust valve improves the breathing performance of the regulator.
The Comfo-bite mouthpiece virtually eliminates jaw-fatigue
The 2-gauge console combines a submersible pressure (contents) gauge and a depth gauge housed in a specially designed case. The unit is completed with a high pressure hose.
The console clearly displays your pressure and depth readings for easy viewing under water and the dials have a long phosphorescent effect for better reading in poor visibility conditions. The submersible pressure gauge provides accurate pressure readings with a range of 360 bar. The depth gauge reads up to 70 m.